Macintosh Os 10.2 And 10.3 - Oki C6150 User Manual

Macintosh OS 10.2 and 10.3

For more information, see "General Information" on page
243.
1. Open the file you want to print.
2. Click File → Print.
3. In Output Options, select Save as File.
4. In Formats, select PostScript.
5. In the PostScript Settings panel, make your choices for
this print job.
Type: specify the PostScript type.
PostScript Level: this must match the PostScript level of
your printer.
Format: select ASCII or Binary. If you select Binary,
make sure that binary data transfer is supported.
Font Data: specify downloading fonts to the file. If you
are only using PostScript fonts, select None.
6. Click Save.
7. At Save as a new name, enter the desired filename.
8. Specify where you want the file saved (location).
9. Click Save.
C6150 User's Guide
245