To Remove A Conference Call Participant; To Talk Privately With One Of The Conference Call Participants; To Transfer Calls; To Answer A Waiting Call - Nokia 9210 Owner's Manual

60

To remove a conference call participant

1 Press Conference
2 Select the caller from the list of participants and press Drop. See Figure 20.
To talk privately with one of the
conference call participants
1 Press Conference
2 Select a participant from the list and press
two: the conference call is on hold and the one-to-one call is active.
3 Once you have finished the private conversation, you can return to the
conference call by pressing
Tip: To view log files of all calls, press the Menu key and select
General log shows all calls, both incoming and outgoing, voice and data.

To transfer calls

Call transfer is a network service where you connect two calls together and
disconnect yourself from both calls. Contact your network operator to check if this
service is available.
When you have one call on hold, and another call active or an outgoing call alerting,
press the Menu key and select
Note: You may be charged for some of the cost of the transferred call; contact
your network operator for details.
Note: You can only transfer voice calls. Fax, data, or conference calls cannot be
transferred.

To answer a waiting call

To know that you have a call waiting, and to be able to answer it, you must first
subscribe to the call waiting network service. Call waiting is selected in network
services, see page 66.
1 When you receive a new call while you already have an active call, you hear a
sound and see a note informing you of a new incoming call.
2 Press Answer. The active call is put on hold.
commands.
commands.
Conference
Call >
Copyright © 2004 Nokia. All rights reserved.
Private call. The call is now split into
call.
Transfer to connect the calls together.
Tools > Log. The