Nokia 9210 Owner's Manual page 183

If you are unable to connect to the Internet after repeated attempts, and have
successfully used your Internet connection previously, or get error messages when
starting the WWW browser, remove and replace the battery and try again.
12. Infrared problems
The communicator may be connected to a PC, laptop, printer, digital camera,
wireless phone or another communicator via the infrared connection.
If you are using the PC Suite for Nokia 9210 Communicator program on your PC, or
if you want to receive data from another communicator or a digital camera, you
must activate the Infrared connection on your communicator before the connection
is made. See PC Suite Guide in the sales package CD-ROM and
infrared connection' on page 33
The PC to which you want to establish the connection must have an IrDA
compatible infrared port; installed and activated IrDA drivers; and Microsoft
Windows 95/98/98SE/Me. For more information on IrDA drivers and their use in
Windows, contact Microsoft.
If you have an IBM Thinkpad laptop with Windows 98 SE installed, you may
encounter problems with infrared connections. If problems occur, proceed as
follows:
1 Click the Windows
2 In the Windows 98 Control Panel, open System.
3 In the System properties
4 Under Network Adapters, select
Properties button.
5 Click the Driver
Driver Wizard starts.
6 Click Next.
7 Select the Install one of the other drivers
8 Infrared PnP Serial Port has been found. Click OK.
9 Click Next.
10 Infrared PnP Serial Port is ready to be installed. Click Next.
11 The new driver has been installed. Click Finish.
12 The computer must be restarted before the new driver can be taken to use. Click
Yes to restart the computer.
13. Printing problems
If you are using the infrared connection, the infrared port of the printer must be
compatible to the IrDA standard. See
Copyright © 2004 Nokia. All rights reserved.
of this guide.
Start button and select
dialog, select the
IBM Thinkpad Fast Infrared Port
IBM Thinkpad Fast Infrared Port Properties
tab and then click the
Settings >
Device Manager
Update Driver...
option and click the
'To print' on page 30.
'To activate the
Control Panel.
tab.
and click the
dialog opens.
button. Update Device
View List... button.
183