Nokia 9210 Owner's Manual page 175

Before your PC can recognise the communicator as a fax modem, you need to install
a new modem configuration for your PC. Please refer to your operating system
manual for more information. During the installation you may be asked to enter the
path to the modem information file. The path on the sales package CD-ROM is: \
Software for PC \ Printer and Modem drivers. Advanced users can also find a list of
supported AT commands from this path. Normally there is no need to use these
commands.
Note: Using the communicator as a fax modem requires that data calls are
supported by the network operator and that this service is active in your
SIM card.
To install fax modem driver using cable connection
1 Start Windows.
2 Insert the Nokia 9210 CD-ROM into the CD-ROM drive of the computer and
locate the modem information file (mdmn9210.INF). Alternatively, you can find
the file on the www.forum.nokia.com Web site.
3 Double-click the
no modem drivers have been installed on the computer before, continue from
step 6.
4 Click the Add button.
5 In the field What type of modem do you want to install?
6 Select the option
7 Click Have disk...
8 Click Browse and locate the CD-ROM drive with the Nokia 9210 CD-ROM.
9 On the CD-ROM, locate a folder
10 In the Modem drivers folder, select Mdmn9210.inf file and click
Tip: To use High Speed connection, your GSM operator must activate High Speed
Data Services on your SIM card.
11 In the Install from disk dialog, Click OK.
12 In the Install New Modem dialog, select
are using High Speed connection (HSCSD), select a speed higher than 9600 bps
and cable connection. Click Next.
13 Select the COM port where the serial cable is connected. Click Next.
14 Click Finish.
15 Remove the CD-ROM from the drive.
16 In your communicator, press the Extras application button, select
and press Open.
17 In the Fax modem application, press
18 On the Connection page of the Fax modem settings, define the following:
Copyright © 2004 Nokia. All rights reserved.
Modems icon in the Windows Control Panel. A dialog opens. If
Don't detect my modem; I will select it from a list
Software for PC/Modem drivers
select Other. Click
Nokia 9210 Communicator
Settings
175
Next
Open or OK.
(Cable). If you
Fax modem,