Wep And Wpa/Wpa2 Wireless Security Check List Form - NETGEAR ProSafe DGFV338 Reference Manual

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
– If you Enable eXtended Range (XR) Feature, significantly longer range connections
than basic 802.11 are maintained through dense barriers (walls, floors, etc.). Faint
connections will maintain connectivity due to improved error correction and lowered
noise vulnerability.

WEP and WPA/WPA2 Wireless Security Check List Form

For a new wireless network, print or copy this form and fill in the configuration parameters. For an
existing wireless network, the person who set up or is responsible for the network will be able to
provide this information. Be sure to set the Regulatory Domain correctly as the first step.
• SSID. The Service Set Identification (SSID) identifies the wireless local area network.
NETGEAR is the default DGFV338 SSID. However, you may customize it by using up to 32
alphanumeric characters. Write your customized SSID on the line below.
________________________________________________
Note: All wireless nodes in the same network must be configured with the same SSID:
• Authentication. Choose "Shared Key" or above for more security. Circle one:
Open System, Shared Key, Legacy 802.1X, WPA with Radius, WPA2 with Radius, WPA and
WPA2 with Radius, WPA-PSK, WPA2-PSK, or WPA-PSK and WPA2-PSK with Radius.
Note: If you selected any of the secure settings—Shared Key or above—the other devices in
the network will not connect unless they are set to same Authentication type and have the
other required mandatory fields correctly enabled as described previously.
• WEP Encryption Keys. For all four 802.11b keys, choose the Key Size. Circle one: 64, 128,
or 152 bits
Key 1: ___________________________________
Key 2: ___________________________________
Key 3: ___________________________________
Key 4: ___________________________________
• WPA-PSK or WPA2-PSK (Pre-Shared Key)
Record the WPA-PSK or WPA2-PSK key. Key: ___________________________________
• WPA or WPA2 RADIUS Settings. For WPA or WPA2, record the following RADIUS
settings:
Server Name/IP Address: Primary _________________ Secondary __________________
3-8
v1.0, April 2007
Wireless Configuration