Charging the Battery
New batteries are shipped partially charged.
Before you can use your phone, you need to
install and charge the battery as described below.
Some batteries perform best after several full
charge/discharge cycles.
1 Open the protective cover
and plug the travel charger
into the USB connector port
on your phone as shown.
Note: It may take up to 10
seconds for your phone to
provide a visible or audible
indication that the battery is
charging.
2 Plug the other end of the travel charger into the
appropriate electrical outlet.
3 When your phone indicates Charge Complete, remove
the travel charger.
Tip: You can safely leave the travel charger
connected to the phone after charging is complete.
This will not damage the battery.
28