3. Drag the Jog Bar to the point in the clip that you want to set as the start/end of
the clip then click
Trimming a Video into Multiple Clips
1. Click
Multi-trim Video
2. In the Multi-trim Video dialog box, view the whole clip first by clicking
to determine how you want to mark segments. If you want to mark segments
to retain, click
Otherwise, select
taken out from the clip.
3. Drag the Jog Bar until you locate the point in the video that you want to use as
the beginning frame of the first segment. Click
Drag the Jog Bar again, this time, to the point where you want the segment to
end. Click
98
(Mark-in/Mark-out).
on the Options Panel.
then select
Selection Mode
Delete selection
(End).
Retain selection
if you prefer to mark segments that you want
.
(Start).