dbx DriveRack 480 User Manual page 105

DriveRack
D/A Performance
Dynamic Range:
Sample Rate:
D/A Wordlength:
System Performance
Internal Wordlength:
THD + Noise:
Frequency Response:
Interchannel Crosstalk:
Pre EQ
Type:
Range:
Notch Filters
Number:
Pre Delay
Length:
Crossover
Type:
Filter Type:
Slope:
Post EQ
Type:
Number:
Range:
Dynamics
Type:
Attack/Release:
Linking:
Post Delay (Driver Alignment)
Length:
Pink Noise Generator
Position:
Phase Compensation
Number:
Amount:
Output Polarity:
Miscellaneous
Output Transformers:
Network:
GUI:
Remote:
RTA Microphone:
ROM Upgrade:
Power Requirements
Watts:
Dimensions
Dimensions:
Weight
Shipping Weight:
®
™
112 dB unweighted, 115 dB A-weighted
48kHz
24 bits
48 bits
0.003% typical at +4dBu, 1kHz, 0dB input gain
20Hz- 20kHz, +/-0.5dB
<-85dB at 1kHz, 0dB input gain
One 31-band Graphic EQ per input channel, or
9 band Parametric EQ per input channel
RTA can be substituted for EQ in channels 3 and 4
+/-12 dB range
1-5 per input channel not to exceed 10 for all input channels
680ms/channel
1x2, 1x3, 1x4, 1x5, 1x6
2x3, 2x4, 2x5, 2x6, 2x7, 2x8, 3x4, 3x5, 3x6, 3x7, 3x8, 4x6, 4x8
Butterworth, Bessel, or Linkwitz-Riley
6, 12, 18 or 24 dB/octave for Butterworth or Bessel filters
12, 24, 36 or 48 dB/octave for Linkwitz-Riley filters
Parametric
4 EQ bands per output channel
+/-15 dB range
Compressor/Limiter with PeakStopPlus™
Program Dependent
All 8 bands are linkable
170 ms per output channel
Pink noise inserted on selected input(s)
One per output channel
0-180 degrees phase shift
Reversible
Optional
Proprietary RS-485 Backbone
RS-232 interface for computer display and
configuration
Optional dbx 480R
Optional
Flash upgradeable through RS-232
100-240V - 50/60 Hz
35 Watts
Height- 1.75" X Width- 19" X Depth 7.90"
8 lbs.
9.5 lbs.
Appendix A
DriveRack™ User Manual
97