Microtek ScanMaker 6100 Pro User Manual page 24

Scan button
This is the default button when ScanWizard 5 - Advanced Control Panel is
launched from an image-editing application. It performs the final scan and
sends the scanned image (output) to the application that you are using.
Scan to button
When ScanWizard 5 - Advanced Control Panel is launched as a stand-alone
program and is the default setting. This is also the default button on
scanners with the "Go" button feature.
E-mail button
ScanWizard 5 automatically attaches the scanned image to your E-mail
message.
Point the cursor on the Scan or Scan To (whichever was activated
previously) button, then click and hold the button for a moment. Select E-
mail from the drop-down menu.
The Save As dialog box appears and prompts you to save the file to your
preferred folder and key in a file name. It is recommended that you use
either .jpg or .bmp as the file format.
Make sure that the check box "Send to application after saving" has been
selected/checked.
Make sure your preferred E-mail application is selected from the listed
options.
Click Save to launch your E-mail editor with the attached image, then type
your message and hit the Send button.
Copy button
Point the cursor on the Scan or Scan To button, then click and hold the
OCR
To Web