Connecting A Subwoofer; Connecting A Pc - Maxent MX-50X2 Owner's Manual

Connecting a Subwoofer

This monitor is equipped with a subwoofer output for connecting to an external amplified subwoofer.
Connect a RCA cable from the subwoofer's
input to the subwoofer's output jack on the
back of the monitor.
Notes:
!
The RCA subwoofer outputs frequencies
below 120Hz.
!
The subwoofer output jack is governed by
FIXED or VARIABLE audio output setting
and works in conjunction with AUDIO OUT
jacks.

Connecting a PC

Using RGB or DVI Video Input
For most PCs, connect the 15-pin D-Sub RGB
connector from the back of the PC to the RGB-
IN Connector located on the back of the
monitor. If you have a PC that is equipped with
a DVI (Digital Visual Interface), you may
connect the PC DVI connector from the back of
the PC to the DVI-IN Connector located on the
back of the monitor.
Connect the red (R) and white (L) audio jacks
from the PC to the R and L jacks located next
to the RGB connector. If you are using a DVI
interface, simply connect the (R) and (L) audio
jacks to the R and L jacks located next to the
DVI connector.
Note:
!
A RGB loop-out labeled RGB Out will allow
another RGB monitor to be connected. The RGB
loop-out will display the same signal as the RGB
In signal source.
Display Connections
(15 Pin D-Sub)
19