Table of Contents
Advertisement
Selecting Signal Source for Sub-Picture
Various signal sources can be displayed within the sub-window under PIP and Side-by-Side picture modes. To
select the input source for sub-window, please follow the steps below.
Once the PIP mode is turned on, you can
change the sub-picture input source by press-
ing the
key.
Pressing the
through all available inputs for the sub-picture.
DVI
Available PIP Input Combinations
Main-picture and sub-picture input combinations are listed below for reference.
DVI
Changing Location of PIP Image
There are four preset positions where the PIP sub-window can be positioned. Once the PIP mode is turned on,
you can switch the PIP sub-picture position to any one of the four corners of the screen.
Press the
key to switch positions. Press-
ing the
key repeatedly will cycle through
all four corners of the screen.
key repeatedly will cycle
Picture Controls
Note:
Please see reference table below for available
PIP/POP input combinations.
Please note the SWAP key is not applicable to
this monitor.
Sub-Picture Positions
Source
Select
DVI
Default
Position
37
Hide quick links:
Advertisement
Table of Contents
