Card Installation - MSI MS-8916 User Manual

Chapter 3

3.1 Card Installation

To install the VGA card to your computer, please follow the steps below:
3.1.1 Installation on new system
1. Remove the computer case.
2. Locate the AGP slot or PCI Express slot on your mainboard.
MSI reminds you...
Inserting your VGA card into a wrong type of slot will
damage your card (refer to your mainboard manual
for more information).
3. Put the card directly over the AGP slot or PCI Express slot and
press one end of the card into the slot first. Slightly but firmly press
the other end until it is fully seated in the slot.
4. Secure the card with a bracket screw.
5. Install all other cards and devices and connect all the cables, and
then replace the case.
6. Connect the monitor. Now, you are ready to install the software on
your computer.
3-2
Bracket screw
VGA card
*The appearance may
be different by different
models
AGP or PCI Express slot
Mainboard