MSI K8NM-FISR User Manual page 50

(v1.x) m-atx mainboard
Table of Contents

Advertisement

MS-7034 M-ATX Mainboard
USB KB/Storage Support
Select [Enabled] if you need to use a USB-interfaced keyboard or storage device in
the operating system. Setting options: [Enabled] and [Disabled].
USB Mouse Support
Select [Enabled] if you need to use a USB-interfaced mouse in the operating system.
The settings are: [Enabled] and [Disabled].
SATA1/SATA2
This allows you to enable or disable onchip Serial-ATA controller. Settings: [Enabled]
and [Disabled].
AC97 Audio
[Enabled] allows the mainboard to detect whether an audio device is used. If an audio
device is detected, the onboard AC'97 (Audio Codec'97) controller will be enabled; if
not, it is disabled. Disable the controller if you want to use other controller cards to
connect an audio device. The settings are: [Enabled] and [Disabled].
MAC LAN (nVIDIA)
Setting to [Auto] allows the BIOS to auto-detect the nVIDIA LAN controller and enable
it. Setting options: [Auto] and [Disabled].
VIA OnBoard 1394 (For K8NM-ILS only)
This item allows you to enable/disable the onboard IEEE1394 controller. The settings
are: [Enabled] and [Disabled].
Onboard LAN
This setting controls the onboard LAN controller. Setting options: [Enabled] and
[Disabled].
Onboard I/O Chip Setup
Press <Enter> to enter the sub-menu and the following screen appears:
Onboard FDC Controller
Select [Enabled] if your system has a floppy disk controller (FDD) installed on the
system board and you wish to use it. If you install add-on FDC or the system has no
floppy drive, select [Disabled] in this field. The settings are: [Enabled] and [Disabled].
3-14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

K8nm-ilsrMs-7034K8nm series

Table of Contents