Ddr Module Combination; Installing Ddr Modules - MSI K8NM-FISR User Manual

MS-7034 M-ATX Mainboard

DDR Module Combination

Install at least one DIMM module on the slots. Memory modules can be installed on the
slots in any order. You can install either single- or double-sided modules to meet your
own needs.
Memory modules can be installed in any combination as follows:
Slot
DDR 1
(Bank 0 & 1)
DDR 2
(Bank 2 & 3)
Maximum System Memory Supported
S: Single Side

Installing DDR Modules

1. The DDR DIMM has only one notch on the center of module. The module will
only fit in the right orientation.
2. Insert the DIMM memory module vertically into the DIMM slot. Then push it in
until the golden finger on the memory module is deeply inserted in the socket.
3. The plastic clip at each side of the DIMM slot will automatically close.
MSI Reminds You...
You can barely see the golden finger if the module is properly
inserted into the socket.
2-8
Memory Module
S/D
S/D
D: Double Side
Notch
Volt
Total Memory
64MB~1GB
64MB~1GB
64MB~2GB