Power Management Setup - MSI K8N Neo2-F User Manual

Power Management Setup

MSI Reminds You...
S3-related functions described in this section are available only when
your BIOS supports S3 sleep mode.
Sleep State
This item specifies the power saving modes for ACPI function. If your operating
system supports ACPI, such as Windows 98SE, Windows ME, Windows 2000, and
Windows XP, you can choose to enter the Standby mode in S1(POS) or S3(STR)
fashion through the setting of this field. Options are:
[S1 (POS)]
[S3 (STR)]
Power Management
This item is used to select the degree (or type) of power saving and is related to the
HDD Power Down item. There are three options for power management:
[Min Saving]
[Max Saving]
[User Define]
Video Off Method
This determines the manner in which the monitor is blanked.
[V/H SYNC+Blank]
[Blank Screen]
[DPMS Support]
The S1 sleep mode is a low power state. In this state, no
system context is lost (CPU or chipset) and hardware main-
tains all system context.
The S3 sleep mode is a lower power state where the in
formation of system configuration and open applications/files
is saved to main memory that remains powered while most
other hardware components turn off to save energy. The
information stored in memory will be used to restore the sys-
tem when a "wake up" event occurs.
Minimum Power Management. Suspend Mode=1 Hour
Maximum Power Management. Suspend Mode=1 Min
Allows end users to configure each mode separately.
This selection will cause the system to turn off the
vertical and horizontal synchronization ports and write
blanks to the video buffer.
This option only writes blanks to the video buffer.
Initial display power management signalling.
BIOS Setup
3-17