MS-7176 ATX Mainboard
MSI Reminds You...
Change these settings only if you are familiar with the chipset.
DRAM Frequency
Use this field to configure the clock frequency of the installed DRAM. Setting options:
[Auto], [400], [533], [667].
Configure DRAM Timing by SPD
Selects whether DRAM timing is controlled by the SPD (Serial Presence Detect)
EEPROM on the DRAM module. Setting to [Auto] enables DRAM timings and the fol-
lowing related items to be determined by BIOS based on the configurations on the
SPD. Selecting [Manual] allows users to configure the DRAM timings and the follow-
ing related items manually. Setting options: [Manual], [Auto].
Memory Hole
In order to improve performance, certain space in memory can be reserved for ISA
peripherals. This memory must be mapped into the memory space below 16MB. When
this area is reserved, it cannot be cached. Settings: [Disabled], [15MB-16MB].
Initate Graphic Adapter
This item allows you to select which graphics controller to use as the primary boot
device. Setting options: [IGD], [PCI/IGD], [PCI/PEG], [PEG/IGD], [PEG/PCI].
Internal Graphics Select
The field specifies the size of system memory allocated for video memory. Settings:
1MB, 8MB, Disabled.
E-3-10
Advanced Chipset Features