MSI 925X Neo Platinum User Manual page 43

MS-7053 ATX Mainboard
SATA Device Configuration
SATA Devices Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
SATA Mode, On-Chip Serial ATA
These 2 items allow you to select the SATA and the ATA/IDE configuration.
For the setting options of SATA Mode, select [IDE] if you want to have SATA as IDE
function. Select [AHCI] to allow the SATA to have Advanced Host Controller Interface
(AHCI) feature, which supports improved serial ATA disk performance with native
command queuing & native hot plug. Select [RAID] to use SATA as RAID function.
Setting options: [IDE], [AHCI], [RAID].
For the setting options of On-Chip Serial ATA, select [Disabled] if you want to
disable both SATA controller. Select [Combined Mode] or [Enhanced Mode] to use the
IDE, S-ATA and P-ATA devices. Select [Auto] to let the system arrange automatically.
Select [SATA Only] to let the SATA operate in legacy mode. Refer to the following
tables for details.
PATA IDE Mode
This item allows you to select the parallel ATA channel. Setting options:[Primary],
[Secondary].
SATA Port
This feature allows users to view the SATA port as primary or secondary channel.
E-3-8
SATA Only
PATA Pri, SATA Sec
SATA Pri, PATA Sec
PATA Only
IDE
AHCI
RAID
On-Chip Serial ATA
(Combined)
[SATA 1/3/2/4]
[IDE1, SATA2/4]
[SATA1/3, IDE1]
[IDE1]
On-Chip Serial ATA
(Enhanced)
[IDE1, SATA 1/2/3/4]
[IDE1, SATA 1/2/3/4]
[IDE1, SATA 1/2/3/4],
[SATA support RAID 0 or 1]