MSI 915P Combo User Manual page 41

SATA Device Configuration
ATA/IDE Configuration, Configure SATA as
These 2 items allow you to select the ATA/IDE and SATA configuration. Select [Disabled]
in ATA/IDE Configuration if you want to disable both ATA/IDE configuration. Select
[Compatible] or [Enhanced] to use the IDE, S-ATA and P-ATA devices. Refer to the
following tables for details.
SATA Only
PATA Pri, SATA Sec
SATA Pri, PATA Sec
PATA Only
IDE
AHCI
RAID
For the setting options of Configure SATA as, select [IDE] if you want to have SATA
as IDE function. Select [AHCI] to allow the SATA to have Advanced Host Controller
Interface (AHCI) feature, which supports improved serial ATA disk performance with
native command queuing & native hot plug. Select [RAID] to use SATA as RAID
function. Setting options: [IDE], [AHCI], [RAID].
ATA/IDE Configuration
(Compatible)
[SATA 1/3/2/4]
[IDE1, SATA2/4]
[SATA1/3, IDE1]
[IDE1]
ATA/IDE Configuration
(Enhanced)
[IDE1, SATA 1/2/3/4]
[IDE1, SATA 1/2/3/4]
[IDE1, SATA 1/2/3/4],
[SATA support RAID 0 or 1]
BIOS Setup
E3-7