Front View - MSI RG54GS2 User Manual

Status LED 1. Flash once per second: W orks normally.
1-2
>>> Before You Begin
This Quick User's Guide is to help you install the RG54GS2
quickly and eas ily. In this guide, you can know your
RG54GS2 well and complete the installation through this
guide.
Please note that all figures in this guide are for reference
only; the actual setup screens may be vary on different
system. For the network adapter's setting, please refer to
Appendix. For more information, please refer to the User
Manual in the CD-ROM or visit MSI website:
msi.com.tw.
>>> Product View

Front View

Antenna
Status LED
The Green light indicates
the status of RG54GS2.
Power LED
The Green light
gr ows to indi-
cate the power
a d a p t e r i s
connected.
Reset Button
Press and hold (using a
pointed object, such as a
stretched clip) this button
longer than a second to re-
start the RG54GS2. Longer
than 5 seconds will reload
the factory default settings.
2. Flash very fast: Firmware upgrade failed or ROM not
burn in flash completely.
3. Flash irregularly: Hardware error caused by some com
ponent broken.
W AN LED
The Green light grows when con-
nect to a xDSL/Cable modem or
Ethernet device.The LED blinks
during data transmission.
LAN LEDs
The Green light grows when a
computer/device connected to re-
spective port. The LED blinks dur-
ing data transmission.
W LAN LED
The Green light grows to indi-
cate the status of RG54GS2's
wireless network.
http://www.
USB LED
The Green li ght gr ows
when a USB printer con-
nects to the USB port.