MSI Hetis 945 User Manual page 76

Power On by Ring
W hen it is set to [Enabled], the feature allows your system to be powered on by the
serial Ring Indicator (RI) line.
USB KB Wake-Up from S3
This setting allows you to enter "Any Key" (max. 8 numbers) to wake up the system
from S3 state.
Resume by Alarm
This function is for setting time for your computer to boot up.
Date (of M onth) Alarm
The field specifies the date for Resume by RTC Alarm. Settings: [0]~[31].
Time (hh:mm:ss) Alarm
The field specifies the time for Resume by RTC Alarm. Format is <hour><minute>
<second>.
PWRON After PWR-Fail
This item specifies whether your system will reboot after a power failure or interrupt
occurs. Available settings are:
[Off]
[On]
[Former-sts]
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the status before power failure
or interrupt occurred.
4-18