Editing; Introducing Edit Menu; Naming A Title; Protecting A Title - LiteOn DD-A300G User Manual

Editing

• The editing function applies to video titles stored on
recordable and rewritable DVD discs only; however,
available functions may vary depending on the disc
format (minus or plus).
• You CANNOT apply editing functions to finalized
DVD+R, DVD-R and DVD-RW discs (except DVD-RW
discs previously formatted in 'Quick Preparation' mode).
Finish all editings before finalizing the types of disc
mentioned above.
Finalize (p.26)
• You may not be able to edit titles recorded with other
DVD recorders.

Introducing Edit Menu

You can activate the Edit menu by pressing the EDIT
button on your remote control during playback. On the
Edit menu, press to move the focus, and ENTER
to confirm you selection.
Editing_00_01
Preview window: the last image of the disc being
played is shown.
Editing options.
Exit: press to exit the Edit menu.

Editing Titles

Editing video title can only be done during playback.
Follow the instruction in 'Playback: Step by Step' to select
the video title you would like to edit and start the playing.
Then press EDIT to display the Edit menu.
Playback: Step by Step (p.34)

Naming a Title

1. On the Edit menu, select 'Rename', then press EN-
TER. The on-screen input keypad will be displayed.
Editing_01_01
On-Screen Input Keypad (p.27)
2. Select 'Clear' first, then press ENTER to delete the
default title .
3. Refer to the instruction in
to enter a new title name.
If you decided not to change the original title name,
press  to select 'Cancel', then press ENTER.
4. When completed, press  to select 'Finish',
then press ENTER.
The entry bar CANNOT be left blank. If such a

condition occurs, you will not be able to exit the
keypad screen. Please follow the instruction given in
the pop-up dialogue box, and go back to complete the
process.
 This DVD recorder does not inhibit you from entering
same names for different titles.
..........................................................................................

Protecting a Title

You can protect the title from accidental erasure or un-
planned editings when you activate the 'Protect' function.
When the function is switched 'On', the title CANNOT
be edited or erased. If you need to edit it, you must unlock
the file first.
1. On the Edit menu, select 'Protect', then press ENTER
to switch on or off the 'Protect' function.
Editing_01_02
40
'On-Screen Input Keypad'