Advanced System Setup; Using Channel Editor - LiteOn DD-A300G User Manual

How to Set Password:
1. Press SETUP to display the Setup menu.
2. Change the password for parental control through
PlaybackPassword.
3. Press number buttons(0-9) to enter your 4 -digit
password.
The default password is 0000.
4. If the password you enter is correct, you will be asked
to enter a new password twice. If two passwords do not
match, a warning message will appear.
If you press or ENTER instead of number buttons
when you are asked to enter a password, you will re-
turn to the second level of the menu without making
any change.
 If the password you enter is incorrect or unmatched, a
warning message will appear for about 5 seconds, and
then you will be asked to enter your password again.

Advanced System Setup

Before you start...
• Complete the basic system settings introduced in the
previous section first.

Using Channel Editor

'Channel Editor' offers an easy-to-manage interface to
organize your TV channel list. You can activate 'Channel
Editor', using the following paths.
Path 1: Using Setup Menu
1. Press SETUP to display the Setup menu.
2. Go through TV Turner  UtilitiesEdit Channel.
Path 2: Using Edit Mode While Viewing TV
1. Press TV(MODE) or press SOURCE to switch to the
TV-viewing mode.
If you press SOURCE, you may need to press the button
more than once to switch to 'TV'.
Recording_01_01 Recording_02_03
2. Press EDIT to activate 'Channel Editor'.
Moving up/down TV
Channels
1. Press  to select a channel from the list, then press
ENTER.
Started_Advanced_02_02
2. Press  to select 'Up' or 'Down' , then press
ENTER.
Started_Advanced_02_02
The order of the TV channel will be changed.
3. Each time when you press ENTER, the item changes
as follows:
Started_Advanced_02_02
4. When completed, press  to select 'Exit' or
another option to continue, then press ENTER.
..........................................................................................
Inserting TV Channels
1. Press  to select a channel from the list, press
ENTER.
2. Press  to select 'Insert', then press ENTER.
3. Press  or the number buttons (0-9) to enter
the channel number, then press ENTER.
Started_Advanced_02_04
20
3 5