The Administration Tab - Factory Defaults; Figure 5-26: Administration Tab - Factory Defaults - Linksys RT41-BU User Manual

Wired Broadband Router

The Administration Tab - Factory Defaults

The Factory Defaults screen allows you to restore the Router's configuration to its factory default settings.
Factory Defaults
Restore Factory Defaults. To clear all of the Router's settings and reset them to its factory defaults, click the
Yes radio button.
NOTE: Do not restore the factory defaults unless you are having difficulties with the Router and have
exhausted all other troubleshooting measures. Once the Router is reset, you will have to re-enter all
of your configuration settings.
After you have clicked the Yes radio button, click the Save Settings button to restore the Router to its factory
defaults, or click the Cancel Changes button to undo your change. For help information, click Help.
Chapter 5: Configuring the Router
The Administration Tab - Factory Defaults

Figure 5-26: Administration Tab - Factory Defaults

31