Wired Network Setup - LG 32LE5400 Owner's Manual

NETWORK

Wired Network Setup

If wired and wireless networks are both available, wired is the preferred method.
After making a physical connection, a small number of home networks may require the TV network
settings to be adjusted.
For detail information, contact your internet provider or router manual.
NETWORK
• Network Setting
• Network Status
• Legal Notice
• ESN
Network Status
TV
Setting
1
Select NETWORK.
MENU
2
Select Network Setting.
ENTER
3
Select Wired.
ENTER
If you already set Network Setting:
4
Select Resetting. The new connection
ENTER
settings resets the current network
settings.
5
Select IP Auto Setting or IP Manual
ENTER
Setting.
When Selecting IP Manual Setting:
1 2 3
ABC DEF
4 5 6
IP addresses will need to be input
GHI JKL MNO
7 8 9
PQRS TUV WXYZ
0
manually.
6
Select Enter.
ENTER
18
ꔂ Move ꔉ Enter
Network Type
: Wired
: Internet is connected
Wired network is recommended
Wired
Wireless
Appeared when wired and
wireless are simultaneously
connected.
Network connecting
Test Close
If you already set
the Network Setting
Previous setting value exists. Do
you want to connect with the
previous setting?
Enter
Resetting
ꔉ Next
IP Auto Setting
Network Setting
Select the IP setting mode.
IP Mode ◀ IP Auto Setting ▶
ꔈIP Address 255 . 255 . 0 . 0
ꔈSubnet Mask 255 . 255 . 0 . 0
ꔈGateway 255 . 255 . 0 . 0
ꔈDNS Server 255 . 255 . 0 . 0
Enter
ꕉ Previous ꕯ Exit
ꔛ
This feature requires an always-on
broadband internet connection.
ꔛ
You do not need to connect to a PC
to use this function.
ꔛ
If Network Setting is not working,
check your network conditions. Check
the LAN cable and make sure your
router has DHCP turned on if you
wish to use the Auto Setting.
ꔛ
If the Network Setting is not com-
pleted, network may not operate nor-
mally.
ꔛ
IP Auto Setting: Select it if there is a
DHCP server on the local area net-
work (LAN) via wired connection, the
TV will automatically be allocated an
IP address. If you're using a broad-
band router or broadband modem
that has a DHCP (Dynamic Host
Configuration Protocol) server func-
tion. The IP address will automatically
be determined.
ꔛ
IP Manual Setting: Select it if there is
no DHCP server on the network and
you want to set the IP address manu-
ally.
ꕯ Exit
IP Manual Setting
Network Setting
Insert the IP address.
IP Mode ◀ IP Manual Setting ▶
ꔈIP Address 255 . 255 . 0 . 0
ꔈSubnet Mask 255 . 255 . 0 . 0
ꔈGateway 255 . 255 . 0 . 0
ꔈDNS Server 255 . 255 . 0 . 0
Enter
ꕉ Previous ꕯ Exit