External Av Source Setup - LG 32LC2D Owner's Manual

AV OUT
( )
VIDEO AUDIO S-VIDEO
AV IN 1
When connecting with an S-Video cable
VCR
OUT S-VIDEO
(R) AUDIO (L) VIDEO
OUTPUT
SWITCH
3 4
IN
1
2
AV OUT V OUT
( )
MONO
VIDEO AUDIO S-VIDEO
AV IN 1 V IN 1
Do not connect to both Video and S-Video at the same time. In the event that you connect
both Video and the S-Video cables, only the S-Video will work.
Camcorder
Video Game Set
VIDEO AUDIO
COMPONENT IN
ANT IN
ANT OUT
VIDEO AUDIO
COMPONENT IN

External AV Source Setup

AUDIO AUDIO
L/MONO
VIDEO VIDEO
1
i.e) 32LC2D**
R AUDIO L VIDEO
Connect the S-VIDEO output of the VCR to the S-
1
VIDEO input on the set. The picture quality is
improved; compared to normal composite (RCA
cable) input.
2
Connect the audio outputs of the VCR to the
AUDIO input jacks on the set.
Insert a video tape into the VCR and press PLAY
3
on the VCR. (Refer to the VCR owner's manual.)
Select AV1 input source with using the INPUT
4
button on the remote control.
- If connected to AV IN2, select AV2 input source.
Connect the AUDIO/VIDEO jacks between TV
1
S-VIDEO S-VIDEO
and external equipment. Match the jack colors
(Video = yellow, Audio Left = white, and Audio
R
Right = red).
MONO
Select AV2 input source with using the INPUT
2
button on the remote control.
AV IN 2 V IN 2
- If connected to AV IN1 input, select AV1 input
source.
Operate the corresponding external equipment.
3
Refer to external equipment operating guide.
• This TV finds the connected input sources
automatically for AV1, AV2 and Component 1-
2. It is presumed that RGB and HDMI/DVI
sources are connected.
Installation
23