Installation Map - LG LS090CE Installation Manual

Installation Map

NOTICE
Installation parts you should purchase.
Air Discarge
Vertical Air deflector
Operation Indication Lamps/
Air Inlet Vents
Air Outlet Vents
NOTE: refrigerant line wall thickness must be at least 0.8 mm (0.031 inch)
Signal Receptor
Forced Operation Button
Saddle
Base Plate
Installation Plate
Sleeve
Bushing-Sleeve
Putty(Gum Type Sealer)
Bend the pipe as closely
on the wall as possible,
but be careful that it
doesn't break.
Vinyl tape(Wide)
• Apply after carrying out a
drainage test.
• To carry out the drainage
test, remove the air filters
and pour water into the heat
exchanger.
Gas side piping
Liquid side piping
Additional drain pipe
Drain Hose
Connecting cable
Installation Manual 11
Installation