JVC UX-QD70SUB Instructions Manual page 60

(Continued)
Recording Sound to Cassette Tapes
Changing the display in the display
window during recording
Press .
• Each time you press
changes as follows.
■While tracks from a disc or MD are
being recorded
DVD, CD or MD
Elapsed playing time
■While a radio broadcast (FM/AM) is
being recorded
FM or AM
■While sound from other equipment
(AUX) is being recorded
Clock display
NOTE
• If the cassette tape reverses direction while a track
is being recorded from a disc or MD, that track is
recorded again from the beginning on the reverse
side of the tape. However, if 12 or less seconds of
that track were recorded on the first side of the
tape, recording on the reverse side of the tape
starts from the beginning of the previous track.
• Before recording a long track from an MD, such
as a recorded concert, using one return record-
ing, use the divide function to divide the track into
sections equal to the length of one side of
the cassette tape. (
57
, the display
Frequency
page 60)
Introduction
For the locations of remote control
buttons, refer to page 55.