Table of Contents
Advertisement
Connections
Connecting the Antennas
Connecting the AM antenna
1
Set up the AM antenna (supplied).
2
Connect the antenna cord.
Main unit (rear view)
Connecting the antenna
cord
Connect the ends of
the antenna cord as
shown above.
3
Turn the AM loop antenna to find
the best position for radio
reception.
Place the AM loop antenna as far
from the main unit as possible.
• Do not place the AM loop antenna on a
metallic table or close to a TV, computer, or
other electric appliances. Doing so may
affect radio reception.
When positioning the antennas, find the best position for reception while listening to an actual radio program
(refer to "Listening to Radio Broadcasts" (
Connect all necessary parts before connecting the power plug.
Insert the tab into
the slot.
Main unit (side view)
When insulation
covers the tips of
the antenna cord,
twist and pull off
the insulation.
page 20)).
■When radio reception with the supplied AM
loop antenna is poor
Twist together electric
wire and the AM loop
antenna cord.
Electric wire
AM loop antenna cord
Main unit (rear view)
Electric wire: 3 - 5 m
(not supplied)
Stretch out the electric
wire horizontally,
preferably in a high place
such as above a window
or outdoors.
Connect the AM loop
antenna cord to the main
unit together with the
electric wire.
10
Advertisement
Table of Contents
