JVC MP-XV841 Instructions Manual page 30

30
EN
You can create the removable recovery CDs using Bootable CD Creator (BCDC).
It is strongly recommended to create those recovery discs in case of need to reinstall your operating
system. This will allow recreating your PC to the initial state.
After creation of recovery discs is completed store them in safe place and don't leave them in this unit
or any PC CD Rom drive. Rebooting PC with one of those discs inside may result in losing data!
1. Click [Start] [ [All Programs] [ [BCDC SE] to start BCDC.
2. Select the writing speed, and press the "Create Recovery Disc" button.
3. The "Once you have successfully created Restore Disc, Create Restore Disc function
is no longer available. Continue?" message now appears. Select "Yes."
* This function will not be available after you will reinstall your operating system using
those discs.
4. The number of CD-R discs required is displayed. When the CD-R discs have been
readied, click "OK."
5. When the "Please insert a blank disc in the drive." message appears, insert one of
the CD-R discs into the drive, and press OK.
(The screen on which the blank CD automatic execution is selected may appear. If it
does, cancel it.)
6. Data writing starts, and when the "Please insert a blank disc in the drive." message
appears from then on, replace the disk.
7. When "Disk creation now completed." message appears, click "OK."
Tip
When a recovery CD which was created by a bootable CD creator is used to initiate recovery, the
recovery area inside the hard drive will be erased.
JVC ORIGINAL SOFTWARE AND SYSTEM APPLICATIONS