Speaker Layout - JVC TH-D5 Instructions Manual

Attaching the base plates—required for the SP-
THD6F only
This side should
face the front.
Use the supplied screws (M5 x 85 mm/3-3/8 inches) to
attach the base plate to the speaker.

Speaker layout

You can enjoy surround sound by placing the speakers as
illustrated (Speaker layout A or B).
Speaker layout A
Select "S.SPK R" as the speaker position mode for
this layout. ( 12)
Center (C)
Front left (L)
Surround left
(SL)
To obtain the best possible surround sound from this
System, place all the speakers except the subwoofer
at the same distance from the listening position. If it
is impossible, adjust the delay time from DELAY
menu. ( 24)
Select "S.SPK F" as the speaker position mode for
Connect the this layout. (
speaker cord.
Front left (L)
Route the speaker
cord.
Place the surround speakers close to the center
speaker.
It is recommended to place the surround speakers
horizontally (see below).
When placing the speakers horizontally
Lay the speakers horizontally so that the JVC logos are
positioned as illustrated below.
Ex.:
Front right (R)
TH-D50/TH-D5/TH-D4 only: you can also lay the front
speakers as illustrated below.
Subwoofer
(SW)
Surround right
(SR)
TH-D60: Do not lay down the front speakers
horizontally.
You can turn the JVC logos to make them
legible.
Attaching the feet
When placing the speakers horizontally, attach the feet to
the bottom of the speakers as illustrated.
Do not connect the power cord
until all other connections have
been made.
Speaker layout B
12)
Surround left (SL) Surround right (SR)
Center (C)
TV
L
SL
TV
L SL
Peel off
Subwoofer (SW)
Front right (R)
R
SR
SR R
6