JVC TH-D5 Instructions Manual page 67

Audio menu (AUDIO)
DOWN MIX This menu is available only when the speaker position mode is set to "S.SPK F" (
Select the audio signal output to the TV connected to the HDMI MONITOR OUT terminal.
DOLBY SURROUND: For the TV equipped with Dolby Pro Logic decoder
STEREO: For ordinary TV
D. RANGE You can enjoy powerful audio even at low volume level while playing Dolby Digital software.
AUTO: Select this to apply the compression only to the multi-channel software (except 1-
COMPRESSION
channel and 2-channel sources).
ON: Select this to always apply the compression.
HDMI AUDIO OUT This setting is effective only for the source "DVD" or "USB."
Select whether the System emits the audio signal from the HDMI MONITOR OUT terminal (ON)
or not (OFF).
• For selecting whether the external component emits the audio signal through its HDMI terminal,
make the setting on the external component.
Speaker setting menu (SPK.SETTING)
SPK.SETTING menu is available only when the speaker position mode is set to "S.SPK R" (
LEVEL
Adjust the output level of each speaker while monitoring the test tone.
FRONT LEFT/RIGHT SPEAKER, CENTER SPEAKER, SURROUND RIGHT/LEFT
SPEAKER: Select the speaker, then adjust the output level.
TEST TONE: Turns on/off the test tone.
DELAY Adjust the delay time of the speakers.
FRONT LEFT/RIGHT SPEAKER,
CENTER SPEAKER, SURROUND
RIGHT/LEFT SPEAKER: Select the
speaker, then adjust the distance from
the listening position to the speakers.
• 1 ms increase (or decrease) in delay time
corresponds to about 30 cm (1 ft) decrease
(or increase) in distance.
• Set to 0 ms for the furthest speaker from
your position as the basis for the delay time
setting.
SUBWOOFER Make the subwoofer setting.
LEVEL: Adjust the output level of the subwoofer.
CROSS OVER: Select an appropriate crossover frequency according to the size of the
cone speaker unit built into the small speaker connected.
120Hz: Select this when the cone speaker unit size is 8 cm (3-3/16 inches) or more.
150Hz: Select this when the cone speaker unit size is between 6 cm (2-3/8 inches)
and 8 cm (3-3/16 inches).
200Hz: Select this when the cone speaker unit size is 5 cm (2 inches) or less.
Other setting menu (OTHERS)
RESUME
ON SCREEN GUIDE
DivX REGISTRATION
Activate (ON) or deactivate (OFF) the resume function.
Activate (ON) or deactivate (OFF) the on-screen guide icons.
The System has its own Registration Code for DivX playback. You can confirm the code of
your System.
• Once you play back a disc created by using the Registration Code, the System's code is
overwritten by a totally different new one for copyright protection purposes.
Underlined items are the
initial settings.
Ex.:
Subwoofer
Center
1 ms
Front left
0 ms
Surround left
2 ms
12).
12).
Front right
0 ms
2.4 m
3.0 m
(8 ft)
(10 ft)
2.1 m
2.7 m
(7 ft)
(9 ft)
Surround right
2 ms
24