Copying/Moving Still Image Files - JVC GZ-MG57AA Instructions Manual

Copying/Moving Still Image Files

Check which buttons to use in the illustration of
"Controls in this section" on page 49.
You can copy or move still image files between
the HDD and SD card using the on-screen
display.
Preparation:
Set the power switch to
Make sure that SD card is inserted in the SD
slot.
Make sure that enough free space is left in the
copy/move destination medium.
1
2
Select and set items as follows.
[REC MEDIA SETTING]
MOVE]
Select
Set
3
Select the desired menu.
Select
Set
[COPY]: Files are copied to the destination
medium while leaving original files
in the source medium.
[MOVE]: Files are moved to the destination
medium while deleting original files
(except read-only files) in the
source medium.
or .
GAIN UP
CAMERA SETTING
BASIC SETTING
REC MEDIA SETTING
DATE/DISPLAY
QUALITY
SELF-TIMER
[COPY/
COPY
MOVE
IMAGE COPY
MEDIA
HDD SD
FILE UNIT
ALL
NUMBER OF FILE
0059
EXECUTE
CANCEL
4
Set the direction of copy/move.
(HDD ] SD or SD ] HDD)
5
6
Set the file unit ([ALL] or [FILE]) to
copy/move.
[FILE]:
Select when you want to transfer the
selected files.
1)Press / /
file, then press 49.
• The mark appears on the file. To
select other files, repeat this step.
2)Press MENU.
[ALL]:
Select when you want to transfer all files in
the recording medium.
7
Select [EXECUTE].
Select
Set
File transfer starts. When [COPYING
(MOVING) COMPLETED] appears, press
49.
To stop the file transfer
Press 49, then select [EXECUTE] and press
49.
EN
/ to select the desired
53