Direct Printing With Pictbridge Printer - JVC GZ-MG57AA Instructions Manual

48
Print Setting (Continued)
EN

Direct Printing with PictBridge Printer

If your printer is compatible with PictBridge, still
images can be printed easily by connecting the
camera directly to the printer with the USB cable.
DPOF setting can also be used. (
To Print by Selecting a Still Image
Preparation:
Set the power switch to
Set the MODE switch to
1
2
Select [DIRECT PRINT].
Select
Set
[PLEASE CONNECT PRINTER] appears.
3
Connect the camera to the printer
with the USB cable.
After a while, the print menu appears.
4
Select [SELECTED PRINT].
Select
Set
5
Select the desired Image.
Select
Set
pg. 47)
.
.
REC MEDIA SETTING
DATE/DISPLAY
DPOF
DIRECT PRINT
EFFECT
PROTECT
DELETE
SELECTED PRINT
DPOF PRINT
CANCEL
PRINT THIS IMAGE
SET
NUMBER OF PRINTS
DATE OFF
PRINT
CANCEL
6
Press to select menus and
/
press / to select settings.
[NUMBER OF PRINTS]:
The number of prints can be set from 1 to
99.
[DATE]:
Set whether to print the date and time.
7
Select [PRINT].
Select
Set
To stop printing after printing starts
1) Press 49.
2) Press / to select [EXECUTE], then
press 49.
NOTE:
If the printer is not recognised, or to print again
after direct printing with a PictBridge printer,
remove the USB cable, select [DIRECT PRINT]
in the menu again, and then reconnect the cable.
To Print Using the DPOF Settings
If the printer is compatible with DPOF, you can
use the DPOF settings. (
After performing step 1-3
4
Select and set items as follows.
[DPOF PRINT]
Select
Set
To confirm the DPOF setting, press
to select [CHECK SETTINGS], then press
49. After that, press MENU to return to the
previous menu.
pg. 47)
[PRINT]
/