Table of Contents
Advertisement
Preparations
LCD Monitor/Viewfinder
Viewing the Viewfinder/LCD Screen
You can monitor video images on this camera recorder using
the viewfinder, LCD screen, or both.
Viewing with the viewfinder
1
Pull out the viewfinder.
2
Incline the viewfinder vertically to a position that
enables easy viewing.
3
Turn the eyepiece focus lever to adjust the focus.
Viewing with the LCD screen
1
Open the LCD cover.
2
Incline the LCD cover to a position that enables easy
viewing.
Face-to-face Shooting
Direction (direction in
which the screen faces the
subject)
ON
Relationship between the viewfinder and LCD screen
displays
When [VF Slide SW] in the [LCD/VF] menu is set to Disable
(A Page 70)
VF Status
LCD Status
OFF
OFF
OFF
ON
ON
OFF
ON
ON
When [VF Slide SW] in the [LCD/VF] menu is set to Enable
(A Page 70)
VF Status
LCD Status
OFF
OFF
OFF
ON
ON
OFF
ON
ON
Memo :
● When the [HDMI], [COMPONENT OUT] or [A/V OUT]
terminal is connected, video images will not appear on the
viewfinder.
ON
Eyepiece
Focus Lever
Video Output
VF
LCD+VF
VF
LCD+VF
Video Output
VF
LCD
VF
LCD+VF
Adjusting the brightness of the viewfinder
Set using [VF Bright] in the [LCD/VF] menu. (A Page 70)
Adjusting the brightness of the LCD screen
Set using [LCD Bright] in the [LCD/VF] menu. (A Page 70)
Setting the brightness of the LCD screen
backlight
Set using [LCD Backlight] in the [LCD/VF] menu.
(A Page 70)
Displays on the viewfinder/LCD screen
You can display the camera status, media information, and
various markers in the video image on the LCD monitor and
viewfinder screens during shooting.
Besides camera and playback images, the following
characters are displayed on the LCD monitor and viewfinder.
Status screen (A Page 23)
Auto White display* (A Page 24)
Menu setting screen (A Page 24)
Alarm display (A Page 24)
Marker and safety zone indicators* (A Page 87)
* Displayed in Camera mode only
Memo :
● When [Display On TV] in the [A/V Out] menu is set to On ,
the status screen and menu screen are also displayed in the
video image of the video signal output terminal. (A Page 73)
LCD
DISPLAY
C.REVIEW/4
ZEBRA/5
Monitor
[DISPLAY] Button
Status Screen
This screen allows you to check the current settings.
To display the status screen, press the [DISPLAY] button in
the normal screen.
The status display differs according to the operation mode,
namely Camera, Media, and USB.
Viewfinder
Advertisement
Table of Contents
