IRiver PMP-120 Instruction Manual page 45

4-6. Customizing the function settings
1. General
4 4 4 4
Load Default
Initialize to original factory setting.
Press the SELECT button after selecting Load
Default to set Load default.
Press the SELECT button after selecting Yes
by using the button to initialize to original
factory setting.
Press the SELECT button after selecting No to
cancel the Load Default Setting.
Note Note
PMP-100 cannot perform this action
while playback.
2. Display
1 1 1 1
Video Output
Select the video signal output system
correspondent with the TV on the player.
NTSC : Korea/ U.S.A etc.
PAL : Europe/ China etc.
Specific features
87
4-6. Customizing the function settings
2. Display
2 2 2 2
LCD Brightness
Adjust LCD contrast of the player.
The LCD contrast can range from 20/ 40/ 60/ 80/
100.
3 3 3 3
Video X Position
Adjust the X Position (horizontal position) of the
motion picture played from the player on the TV.
(-20 ~ 0 ~ 20)
4 4 4 4
Video Y Position
Adjust the Y Position (vertical position) of the
motion picture played from the player on the TV.
(-20 ~ 0 ~ 20)
Specific features
88