IRiver PMP-120 Instruction Manual page 12

2-3. Connecting and installation
Use only the AC Power Adapter supplied with the player.
The AC operating voltage of this player is 100~240V, 50/60Hz.
Charging
1 1 1 1
Charging by using AC adapter
1
Connect the AC adapter to the
player's DC IN 5.0V connector.
2
Connect the AC adapter plug to a
power socket. (AC adapter for this
player is 120~240V, 50/60Hz.)
If a power source is connected when
the player is turned off, a charging
indicator light will illuminate while the
player is charging.
3
The light will turn off when
charging is complete.
4
Press and hold the POWER
button while charging to start
the player in Function selection
mode.
Getting started
21
2-3. Connecting and installation
Charging
2 2 2 2
Charging by using USB cable
1
Push the USB lock to open the
protective cover.
2
Connect the USB cable to the
B
player 's USB Device Port.
3
Connect the USB cable to the
PC's USB port.
A charging indicator light will
illuminate while the player is
A
charging.
4
The light will turn off when
charging is complete.
Note
Note The charging time : Approx. 4 hours (At full discharge)
The playback time : Approx. 4 hours (Video)
Getting started
22