Table 4-4 Line Printer Mode Font Descriptions - Intermec 6804DM Technical Reference Manual

SECTION 4
"
"
"
CR
"
"
"
"
Both Line Feed and Carriage Return commands are pro-
vided for your programming convenience.
" NOTE:
To print and advance "n" lines, use that number of CR commands (or
LF commands, or CR/LF or LF/CR combinations).
ESC w n Select Font
"
"
"
"
Name Font
MF055 5.5
MF072 7.2
Dec: 10
Hex: 0A
Function: Line feed will cause the line to print and the
paper to advance.
Carriage Return
Format: CR
Dec: 13
Hex: 0D
Function: Like a line feed (see above), the carriage re-
turn command will cause the line to print and the pa-
per to advance.
Format: ESC w n
Dec: 27 119
Hex: 1B 77
Function: Selects a font from the following list, given
"n," a binary eight--bit number. The first three fonts in
the table below are permanent fonts. The next four
have been added for you but can be removed. The de-
fault font style is a 20.4 cpi font (n= 33 decimal, 21
hexadecimal.)
Table 4-4
Line Printer Mode Font Descriptions
ASCII Hex Dec Dots
Wide
# 23 35 37
" 22 34 28
Intermec Portable Printers Technical Reference Manual
Operation
n
n
Dots Description
High
39 96 chars large block
31 96 chars large block
4-19