Linerless Labels; Automatic Paper Loading; 6805A And 6806 Printers; 6804 And 6808 Series Of Printers - Intermec 6804DM Technical Reference Manual

SECTION 4

Linerless Labels

If you are using linerless paper, it is recommend that you
use the manual paper loading method.

Automatic Paper Loading

6805a and 6806 Printers

1. Press the red self test button to wake the printer.
2. With the loose, clean edge of the paper coming from
3. If the printer is on, it will feed the paper automatical-
4. Insert the plastic paper rod through the center of the
5. Place the narrow end of the rod into the small hole on
6. Snap the wider end into the cutout on the opposite
7. Turn the paper knob clockwise to tighten the paper
8. Replace the end boot and tear off extra paper.

6804 and 6808 Series of Printers

1. With the loose, clean edge of the paper coming from
2. Press the red self test button to wake the printer.
3. Push the button again while the printer is awake
4. Insert the paper into the paper well with it resting on
the bottom of the roll, insert the edge of the paper be-
tween the roller and the platen.
ly. If you have allowed the printer to fall into sleep
mode, press the red self test button.
paper roll.
the side of the paper cavity.
side of the paper cavity.
slack in the cavity.
the bottom of the roll, insert the edge of the paper be-
tween the roller and the platen.
causes the mechanism to feed about 1" of paper.
the paper rod clips.
Intermec Portable Printers Technical Reference Manual
Operation
4-3