Adjusting The Computer Image; Using Energy Saving Mode - Insignia NS-42P650A11 User Manual

Adjusting the computer image

To adjust the computer image:
1 Right-click a blank space on the Windows
desktop. The Display Properties dialog box
opens.
Note
The Display Properties dialog box may appear
different depending on your version of Windows and
your video card. However, these steps should work in
most cases.
2 Click the Settings tab.
3 Drag the screen resolution slider to the correct
resolution. The best resolution is:
• NS-42P650A11—1024 x 768
• NS-50P650A11—1360 x 768
4 If the dialog box has a vertical frequency option,
set it to 60 or 60 Hz.
5 Click OK to close the dialog box.
If the signal from the system equals the
standard signal mode, the screen is adjusted
automatically. If the signal from the system does
not equal the standard signal mode, adjust the
mode (refer to your video card user guide), or
there may be no video. For a list of compatible
display modes, see "Computer display modes"
on page 41.

Using Energy Saving mode

You can save energy by reducing the brightness of
the screen.
To use Energy Saving mode:
1 Press MENU. The on-screen menu opens.
2 Press
3 Press
4 Press
5 Press RETURN to return to the previous menu or
www.insigniaproducts.com
Picture
Mode
Contrast
Sound
Brightness
Channel
Sharpness
Color
Setup
Tint (G/R)
Input
Picture Options
or to highlight Setup, then press
ENTER to access the Setup menu.
Channel
Plug & Play
Setup
Input
Language
Time
Game Mode
V-Chip
Caption
Energy Saving
or to highlight Energy Saving, then
press ENTER.
or to highlight a mode, then press
ENTER. You can select:
• Off—Turns off energy saving.
• Low—Sets mode to low.
• Medium—Sets the mode to medium.
• High—Sets the mode to maximum. Use this
mode to watch TV in a dark environment. It
will reduce eye strain as well as save energy.
EXIT to close the menu.
: Standard
: 95
: 45
: 50
: 50
: G50/R50
: English
: Off
: Off
21