Signal Strength - Hitachi UltraVision L42S503 Operating Manual

Channels
Select Channels to set your signal source options, run New Channel
Scan, Check Signal Meter and Set Channel List (Add channels to
List, Channel/Labels and Favorite Channels).
Video
Source

Signal Strength

Audio
New Channel Scan
Setup
Add Channels to List
Channel List
Channels
Channel Labels
Favorite Channels
Move SEL Select
1. Press CURSOR PAD ,
2. Press the SELECT button or CURSOR PAD
Video
Source
Signal Strength
Audio
New Channel Scan
Setup
Add Channels to List
Channel List
Channels
Channel Labels
Favorite Channels
Move Select
SEL
Source
Select the signal Source for the TV. When using an indoor or outdoor
antenna select Air. When using a cable system select Cable.
Signal Strength
Select Signal Strength when using an indoor or outdoor antenna.
This feature will show the signal strength of the Antenna signal to
help you adjust your antenna to optimize signal reception. Use the
MENU button or EXIT button to return.
The Signal Strength meter will not be available
NOTE
(grayed out) when watching analog channels.
New Channel Scan
This feature will automatically store active Analog and Digital
channels to the Channel list. This scan will erase all channels
previously stored in the list.
Video
Source
Signal Strength
Audio
New Channel Scan
Setup
Add Channels to List
Channel List
Channels
Channel Labels
Favorite Channels
Move Select
SEL
1. Use the CURSOR buttons to highlight then press SELECT key
to start.
If you do not want to erase all scanned channels,
NOTE
please use the Add Channels to List option instead.
Air
EXIT Exit
Return
to highlight functions.
to select.
Air
EXIT Exit
Return
Air
EXIT Exit
Return
Add Channels to List
This function allows you to add channels to the channel memory.
Sometimes adjusting the antenna direction will allow reception of
additional channels..
Video
Searching, Please wait ...
Audio
Searching Digital CH
Setup Analog Channels Found
Digital Channels Found
Channels
Move Select
SEL
1. Use the CURSOR PAD to select the Add Channels to List.
2. Press the SELECT button to start scanning.
3. Press the EXIT button to return to normal viewing.
Only the Channels that have not been added to the list
will be stored.
Channel List
This function allows you to review which channels have been
added to the CHANNEL list.
Video
Ch 3-0
Audio
Ch 5-0
Setup
Ch 6-1 XETV-DT
Ch 10-0
Channels
Ch 15-0
Ch 31-1 KNSD-HD
Move Select
SEL
1. Use the CURSOR PAD to navigate the Channel List.
2. Press the SELECT or „ button to select Skip or View.
3. Press the EXIT button to return to normal viewing.
The Channel List cannot be updated by only changing the cable
source. Auto Channel Scan must be performed for the Channel
List to be updated.
Channel 3
1
3
10%
EXIT Exit
Return
Channel List
Skip
View
View
View
View
View
EXIT Exit
Return
39