Hitachi UltraVision L42S503 Operating Manual page 31

Video
Aspect Ratio reference
Input Signal
When Watching Standard Definition Pictures:
(4:3 Signal)
(Vista)
(Cinema)
When Watching High Definition Pictures:
(Signal 16:9 )
Reel120 Motion
Hitachi's advanced video processor can display movies at 120
frames per second. The following settings are available to smooth
the motion of movie sources. Please note that the effect may not
be immediately noticeable and the effect depends on the content
of the movie.
Video
Color Temp.
Noise Reduction
Audio
Auto Movie
Setup
Backlight
Aspect Ratio
Channels
Reel120 Motion
Reset
Move Select
SEL
1. Use the CURSOR
Reel120 Motion function.
2. Press the CURSOR PAD
High: Use this setting for the maximum smooth motion effect.
Mid: Use this setting for a moderate smooth motion effect.
Low: Use this setting for a mild smooth motion effect.
Off: Use this setting if there is noise with the High,
Medium or Low settings.
Please note that the effect may no be immediately
NOTE
noticeable and the effect depends on the content
of the movie.
Display Aspect
Display Screen
Recomended
4:3
16 : 9
Zoom 1
Zoom 2
16 : 9
Full
High
Mid
Auto
30
Auto
Off
EXIT Exit
Return
PAD , to the highlight
to select Off, Low, Medium or High.
To display suitable screen as follows.
Displays 4:3 programs in there original aspect ratio with bars to
the left and right of the image.
Expands a 4:3 aspect ratio program to fill the widescreen 16:9 screen
Use this aspect mode to expand letterbox movies to fill the screen.
Note that some of the image may not be visible.
Use this aspect mode to fill the screen with very widescreen
movies. Note that some of the image may not be viewable in
this mode.
Plays a 16:9 image faithfully showing 95% of the size.
Should be: Use this mode when you want to see 100% of the signal.
Note that some signals have noise. In the case of noise use the 16:9
mode.
Reset
This function allows you to Reset the Video Menu Settings of the
present input and return it to the Dynamic video mode.
Video
Audio
Setup
Channels
Move
1. Use the CURSOR PAD
2. Press the SELECT button or CURSOR PAD
Yes or No.
3. Press the SELECT button on the Yes option to execute the
reset of the Video settings.
You can customize each of the Video Inputs to your preference to
increase viewing performance and pleasure, depending upon the
video program being viewed. If RESET is selected, only the selected
Input will reset to the initial conditions as explained above.
If RESET is selected in HDMI1, only HDMI1 will return to
factory conditions.
High
Color Temp.
Mid
Noise Reduction
Auto
Auto Movie
30
Backlight
Aspect Ratio Auto
Reel120 Motion Off
Reset
Select EXIT Exit
SEL Return
, to the highlight functions.
to select
31