Hitachi CP-X807 User Manual – Operating Manual page 59

MIU Menu (continued)
Item
SETUP
(continued on next page)
Selecting this item displays the MIU SETUP menu.
Use the ▲/▼ buttons to select an item, and the ►
or ENTER button on the remote control to perform
the item.
DHCP
(Dynamic Host
Configuration
Protocol)
IP ADDRESS
SUBNET MASK
DEFAULT
GATEWAY
DNS SERVER
Description
Use the ▲/▼ buttons to turn DHCP on/off.
ON ó OFF
Select OFF when the network does
not have DHCP enabled.
• When the "DHCP" setting changes to "ON",
it takes a little time to obtain IP address from
DHCP server.
• Auto IP function will be assigned an IP
address if the projector could not obtain an IP
address from server even if DHCP is "ON".
Use the ▲/▼/◄/►
buttons to enter the IP
ADDRESS. This function
can only be used when
DHCP is set to OFF.
• The IP ADDRESS is the number that identifies this
projector on the network. You cannot have two devices
with the same IP ADDRESS on the same network.
• The IP ADDRESS "0.0.0.0" is prohibited.
Use the ▲/▼/◄/►
buttons to enter the same
SUBNET MASK used by
your PC. This function
can only be used when
DHCP is set to OFF.
• The SUBNET MASK "0.0.0.0" is prohibited.
Use the ▲/▼/◄/►
buttons to enter the
DEFAULT GATEWAY
(a node on a computer
network that serves as an
access point to another
network) address.
This function can only be used when DHCP is
set to OFF.
Use the ▲/▼/◄/►
buttons to input the DNS
server address. The DNS
server is a system to control
domain names and IP addresses on the Network.
MIU Menu
59