Hitachi CP-X807 User Manual – Operating Manual page 45

OPTION Menu (continued)
Item
MY BUTTON
SERVICE
(continued on next page)
This item is to assign one of the following function to MY BUTTON
1 and 2 on the remote control (6).
Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then
using the ▲/▼ buttons sets one of the following functions to the chosen button.
• RGB1: Sets port to RGB1.
• RGB2: Sets port to RGB2.
• HDMI: Sets port to HDMI.
• MIU: Sets port to MIU.
• COMPONENT: Sets port to COMPONENT (Y, C
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
• INFORMATION: Displays the INPUT-INFORMATION (47) or
MIU-INFORMATION (64) or nothing.
• AUTO KEYSTONE
Performs automatic keystone distortion correction (36).
• MY MEMORY: Loads one of adjustment data stored (29).
When more than one data are saved, the adjustment
changes every time the MY BUTTON is pushed.
When no data is saved in memory, the dialog "No
saved data" appears.
When the current adjustment is not saved to
memory, the dialog as shown in the right appears.
If you want to keep the current adjustment, please press
the ◄ button to quit. Otherwise loading a data will overwrite the current adjusted condition.
• ACTIVE IRIS: Changes the active iris mode.
• PICTURE MODE: Changes the PICTURE MODE (25).
• FILTER RESET:
Displays the filter time reset confirmation dialogue (44).
• VOLUME+: Set the volume up.
• VOLUME-: Set the volume down.
• AV MUTE : Turns the picture and audio on/off.
• e-SHOT: Displays the e-SHOT menu (63).
• LIVE MODE : Sets port to MIU and display an image on the LIVE mode.
While using the LIVE mode, the LIVE MODE SETTING menu is displayed.
• THUMBNAIL : Sets port to MIU and displays the THUMBNAIL screen.
• SLIDE SHOW : Sets port to MIU and starts the SLIDE SHOW display.
• DIRECTORY : Sets port to MIU and displays the DIRECTORY screen.
• REMOVE MEDIA : Displays the REMOVE MEDIA menu.
Selecting this item displays the SERVICE menu.
Select an item using the ▲/▼ buttons, and press the ► button or
the ENTER button on the remote control to execute the item.
FAN SPEED ó AUTO ADJUST ó GHOST ó FILTER MESSAGE ó LENS TYPE ó KEY LOCK
FACTORY RESET ó INFORMATION ó REMOTE FREQ. ó REMOTE RECEIV.
FAN SPEED
Using the ▲/▼ buttons switches the rotation speed
of the cooling fans. The HIGH is the mode for use at
highlands etc. Note that the projector is noisier when
the HIGH is selected.
HIGH ó NORMAL
Description
:
OPTION Menu
/P , C /P ).
B B r r
45