Pointing Devices On Dual Device Models Only - HP Compaq 800c Hardware Manual

Pointing Devices and Keyboard

Pointing Devices on Dual Device Models Only

The notebook is set at the factory to enable you to use the
pointing stick and TouchPad components interchangeably. For
information about disabling some or all dual device components,
refer to "Enabling or Disabling Dual Device Components," next
in this section.
Using the Pointing Stick Components
To move the cursor, sometimes called the pointer, press the
pointing stick 1 in the direction you want to move the cursor.
To increase or decrease cursor speed, increase or decrease the
directional (not downward) pressure on the pointing stick. If the
cursor continues to move after you release the pointing stick, wait
a few seconds and the cursor will stop moving.
Use the right 2 and left 3 pointing-stick buttons as you would
the right and left buttons on an external mouse.
Using the TouchPad Components
To move the cursor, slide your finger across the TouchPad
surface 4 in the direction you want to move the cursor.
Use the left 5 and right 6 TouchPad buttons as you would the
left and right buttons on an external mouse.
Identifying dual device components
2–2 Hardware Guide