Set The Power Save Mode Time; Set The Ring And Beep Volume - HP 610 Reference Manual

hp digital copier series

set the power save mode time

set the ring and beep volume

50
The bulb in your HP Digital Copier remains on for a specified period so that
the unit is immediately ready to respond to your request. When the
HP Digital Copier has not been used within that specified period, it turns
the bulb off to preserve power and displays Power Save On in the front-
panel display.
Tip! You can exit this mode by pressing any button on the
front panel.
Your unit is automatically set to enter power-save mode after 12 hours.
Follow these steps if you want the HP Digital Copier to enter this mode
earlier.
1
Press Menu.
2
Press 3, then press 6.
This selects the Status and Maintenance menu, then selects the Set
Power Save Mode Time option.
3
Press until the desired time appears, then press Enter.
The volume of the button beeps on your HP Digital Copier is preset, but you
can easily change the volume.
1
Press Menu.
2
Press 3, then press 8.
This selects the Status and Maintenance menu, then selects the Ring
and Beep Volume option.
3
Press to select Soft, Loud, or Off, then press Enter.
maintain your hp digital copier