Use Copier Features; Make Copies; Before You Begin - HP 610 Reference Manual

use copier features

make copies

before you
begin
use copier features
Your HP Digital Copier lets you do the following:
• Produce high-quality color and black-and-white copies using a variety
of paper types and sizes, including iron-on transfers.
• Reduce or enlarge the size of the copies you make from 25% to
400% of the copy's original size. (Percentages may vary between
models.)
• Make the copy lighter or darker, adjust the color intensity, select the
number of copies, and specify the quality of the copies you make.
• Use special copying features to create a poster, make many sizes of
photos, make high-quality copies of photos using special photo
paper, or to create transparencies.
• Make two-sided copies or copy from two-sided documents (on some
models).
All copy settings that you select on the front panel are reset two minutes
after the HP Digital Copier completes a copy, unless you save the settings
as the default settings. For more information, see change settings for all
copy tasks on page 18.
Do the following:
• Follow the instructions in the Setup Poster to set up your HP Digital
Copier.
• Make sure paper is loaded in the main tray. If you need more
information, see load paper on page 9.
4
15