Antenna (Ntsc And Atsc) - HP z560 User Manual

Antenna (NTSC and ATSC)

If you are using a VHF and UHF broadcast television
antenna (sold separately) with no cable TV box, digital
cable box, or satellite receiver, do the following to
connect the NTSC and ATSC TV signal source to your
HP Digital Entertainment Center:
1
Install a splitter (provided) as shown in the following
illustration (select models only). Connect the splitter
input to the antenna (outdoor shown).
2
Connect two coaxial cables to the splitter outputs.
Turn the connectors to tighten them.
3
Connect a coaxial cable into the Cable/Ant.
In connector on the back of the HP Digital
Entertainment Center. Turn the connector to
tighten it.
4
Connect a coaxial cable into the
HDTV/SDTV Ant. In connector on the
back of the HP Digital Entertainment
Center. Turn the connector to tighten it.
HDTV and standard signal source — TV antenna
82
HP Digital Entertainment Center
HDTV / SDTV ANT. IN
ATSC TUNER
AUDIO OUT AUDIO 7.1 PRE-OUT
SURROUND SURROUND CENTER FRONT
BACK
L L L L
100-240V- 4/A 50/60Hz
R R R R
SUB
AC IN
WOOFER
COAXIAL
OPTICAL
AUDIO
DIGITAL HI SPEED USB 2.0 1394
OUT
CABLE/ANT. IN
DUAL
TUNER
Y
Pb
R
Pr
10/ 100/ 1000
R
ETHERNET
VHF
Antenna
Antenna
Cable From Wall
Coaxial
WIRELESS LAN 802.11 a/b/g
REMOVABLE ANTENNA
ACTIVITY
LINK
TV SOURCE 1 IN
CABLE/ANT. IN FM ANTENNA IN
L
Ω
DUAL 75
AUDIO
VIDEO S-VIDEO COAXIAL
TUNER
TV SOURCE 2 IN
HDTV / SDTV ANT. IN
AUDIO L S-VIDEO
ATSC TUNER
INFRARED TRANSMITTER OUT
2 1
Roof Antenna
UHF
Coaxial