Video Out From Av Receiver To Tv - HP z560 User Manual

Video Out from AV Receiver to TV

Switching: Switch audio and video through your AV
receiver if your AV receiver switches video and has the
correct connections. This method gives you the best audio
quality, and you can easily switch audio/video inputs
through your AV receiver remote.
Connectors: Choose a Video Out connector and
corresponding cable that attaches to the back of your TV:
Standard High
definition definition
TV display
Component Component
(Y, Pb, Pr) (Y, Pb, Pr)
VGA
HDMI
Equipment: The TV, AV receiver, and some cables are
sold separately. See the documentation that came with
your TV and AV receiver.
Configuration: You can adjust the TV display, after
initial turn on, using the Media Center software settings.
See "Initial Configuration" on page 127.
Procedure:
1
Connect a video cable from the HP Digital
Entertainment Center back panel Video Out to the
AV receiver Video In.
2
Connect a video cable from the AV receiver Video
Out to the TV Video In. Use the same connector type
if your AV receiver does not support cross-
connecting.
If your TV and AV receiver has multiple input
and output connections, then it has front
panel input and output switches.
You must select the correct input and output
from the TV and AV receiver front panel or
remote control to hear sound and see video.
Monitor
Component video output requires specific
configurations for certain display types and
resolutions. Go to http://www.hp.com/
support and select your model number for
instructions on using component video.
VGA
HDMI
65
Connecting Video Out