Installing Memory Module - HP xw6400 Service And Technical Reference Manual

3. Lift the DIMM straight up 2 and remove it from the unit.
Figure 4-18
NOTE
line up when installing a DIMM.

Installing memory module

CAUTION
Third-party DIMMs might not be electrically or thermally compatible, so they are not supported
by HP.
You must load memory modules in valid configurations:
●
If loading only one DIMM, install it in slot 1.
● If loading two DIMMs, install them in slots 1 and 3.
● If loading four DIMMs, install them in all slots.
●
Load the memory module pairs in order of size, from smallest to largest.
Figure 4-19
ENWW
Removing the DIMM
DIMMs and the DIMM sockets are keyed for proper installation. Be sure these guides
HP only ships DIMMs that are electrically and thermally compatible with this product.
Identifying the memory slots
Removal and replacement of components 73