Configuring system BIOS
Configure the system BIOS to enable embedded SATA RAID functionality.
1.
Press F10 to enter the system BIOS setup.
2.
Use the arrow keys to highlight the desired language, then press Enter.
3.
Use the arrows on your keyboard to highlight Storage>Storage Options, then press Enter.
4.
Use the up or down arrow key to highlight SATA Emulation.
5.
Use the left or right arrow key to select RAID/AHCI.
6.
Press F10 to accept the new setting.
7.
Use the arrows on your keyboard to highlight Advanced > Power-On Options, then press
Enter.
8.
Use the up or down arrow key to highlight POST Messages.
9.
Use the left or right arrow key to select Enable.
10.
Press F10 to accept the new setting.
11.
Use the arrow keys to highlight Advanced>Device Options, and press Enter.
12.
Use the up or down arrow key to highlight SATA RAID Option ROM Download, and press
Enter.
13.
Use the left or right arrow key to select Enable.
14.
Press F10 to accept the new setting.
15.
Use the arrows on your keyboard to highlight File>Save Changes and Exit, and press Enter.
16.
Press F10 when prompted.
ENWW
Configuring system BIOS
147